Delivering a smooth even beam, the PLCyc1 seamlessly blends intense washes of colour on cycloramas up to 5m high. Using LED source technology combined with a properly shaped asymmetrical reflector, the PLCyc1 delivers consistent light distribution without the compromising performance of vertical or horizontal spreader lenses.
Each luminaire can replace the equivalent of a traditional four colour 1000W per circuit Cyc luminaire, and with the convenient powercon system, the PLCyc1 can light a typical cyclorama with a single 10A non-dim circuit.
The PLCyc1 LED luminaire has an on-board LCD menu system for setup, control, and addressing. The menu system is intuitive and offers all configuration options with a few button presses.
Having trouble getting data to your light on set? All PLCyc1 luminaires support wireless DMX512 control for instant connections without running control wiring. Each optional wireless receiver also has a DMX512 out port to control adjacent luminaires. Receivers and transmitters are available from Wireless Solution, City Theatrical and Lumenradio.
All PLCyc1 luminaires support wired and wireless DMX512 control with a choice of 8- or 16-bit control resolution. With the increased development of LED luminaires like PL1 and PLCyc1 with 4 or more colours, additional control is needed for intuitive operation.
All Philips Strand Lighting Palette family controls now support extended colour control to simplify programming and luminaire colour matching.
The Selecon difference
Delivering on the Promise of LED Lighting
Fewer fixtures to cover the cyclorama, less power and no dimmer circuits makes the PLCyc1 the obvious choice for lighting a medium sized cyclorama.
Consistent light distribution without the use of vertical or horizontal spreader lenses.
Advanced Control
On-board LCD menu system for setup, control, and addressing. Intuitive menu offering all configuration options with a few button presses.
PowerCon in and thru from one 10A non-dim circuit.
Your Choice
Infinite colour choices from one RGBW LED engine delivering exceptional performance and life.
Rotate the yoke to create top cyclorama or groundrow.
Electrical and Mechanical Specifications
| Source | 1 each, true RGBW 120W LED chip |
| Output | > 2000 Lumens (white light) |
| Operating Voltage | 100V–240V AC (auto-ranging) |
| Frequency | 50/60Hz |
| Current Draw |
1.3A at 120VAC, 0.70A at 240VAC
Maximum load with all LEDs at full RGBW |
| Ambient Temperature | 35°–40°C |
| Control | On-board menu / DMX512 |
| Construction | Aluminium, sheet metal, and molded engineering grade plastic components |
| The LED Engine | The PLCYC1's powerful LED engine offers exceptional performance and life. Under normal operating conditions our LED engine has a life expectancy in excess of 25,000 hours, however under worst case operating conditions with the luminaire set to continuous full output it is possible that a small percentage of LEDs may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine. |
| Colours | Black or White |
| Weight | 3.4kg / 7.5lb (luminaire only) |
| Standards Compliance | ETL / cETL Listed and CE Marked |
| Warranty | Three-year Warranty. |
Size Diagrams
|
- Single source RGBW LED chip delivers limitless colour mixing capabilities and colour temperature.单一来源RGBW LED芯片提供无限的色彩混合功能和色温。
- Single unitsmean it is no longer necessary to change lamps or mix the colour on the cyclorama using multiple fixtures. 单一unitsmean不再需要改变灯或圆形幻画上的颜色混合使用多个装置。One source allows multiple colours.一个源允许多个颜色。
- Fading between colours is seamless and allows designers a new level of creativity.褪色的颜色之间无缝和允许设计师一个新的水平的创造力。
- Homogenised fully mixed light, no multiple colour shadows.单一化充分混合的光,没有多种颜色的阴影。
- Asymmetric reflector directs more light downward to produce visually even illumination down a vertical surface.不对称反射器指导更多的光向下垂直表面产生视觉照明下来。
- Quick selection of colour pre-sets.快速选择预设颜色。
- Can be used as a top cyclorama or a groundrow simply by rotating the yoke.可以用作顶部圆形幻画或groundrow只需旋转轭。
Precision精度
- PowerCon in and through to light your cyclorama from one 10A non-dim circuit.PowerCon并通过光你的圆形幻画从一个10 non-dim电路。
- Typical power consumption varies between 26W and 83W.典型的能耗变化26 w至83 w。
- DMX512 Input/Output with 8 or 16-bit resolution.DMX512 8或16位分辨率的输入/输出。
- Wireless DMX module available.无线DMX模块可用。
Simplicity简单
- No need for dimmers, connect directly to mains supply.不需要调光器,直接连接到电源供应。
- No need for lamp replacement or filter maintenance.不需要灯替换或过滤器维护。
- Onboard LCD Menu for ease of addressing/setup.车载液晶菜单为便于解决/设置。
- Fitted with rated safety cable.装有额定安全电缆。
- Philips Selecon 3-year warranty.飞利浦Selecon 3年保修。
